VIACONDUITS
Viacondotti is a decorative product for interiors characterized by a rustic-sandblasted effect adorned with golden or silver shades and glitter.

It is a decorative finish
It is based on acrylic resin and is available in gold and silver glitter bases that can be colored with a tintometric system to obtain a wide range of colors.


Main feature of the product
Depending on the amount and type of pigment used to color the product, a more or less covering effect can be obtained.

Application method
VIA CONDOTTI can be applied to surfaces of different natures after their treatment.
Benefits of Decorative Paint Ferrara Design
A beautifully unique appearance for the room, with a modern touch.
Eco-friendly decorative paint that washes easily and has excellent resistance to dirt.
It is applied with a brush in a single, very easy layer.
Ready-to-use product (if necessary, it can be diluted with small amounts of water).
PREPARATION OF THE SUPPORT:
VIA CONDOTTI can be applied to surfaces of different natures after their treatment.
New plasters:
Make sure the plaster is dry and hardened properly (at least four weeks).
If necessary, reinforce with suitable products.
In the presence of mold or algae, treat the surface with appropriate biocides.
Apply a possible layer of water-based fixing insulation.
Apply one or two coats of washable quartz paint.
Old plasters:
If the old paint is not perfectly anchored, it must be removed mechanically.
Any defects must be filled.
In the presence of mold or algae, treat the surface with appropriate biocides.
Apply a possible layer of water-based fixing insulation.
Apply one or two coats of washable quartz paint.
APPLICATION PROCEDURE:
Select the gold or silver base and add the toner or shade with a tintometer. Mix carefully. Then, add the glitter to your liking (recommended amount, ¼ package per 1 liter of product). Mix carefully.
It is applied with a brush in two layers, taking care to continuously cross the tool to distribute the mineral fillers and orient the pearlescent pigments.
• Tools: brush.
• Dilution: none (ready-to-use product).
• Climatic conditions: Temperature +5 / + 35°C;
• The relative humidity does not exceed 75%.
• Drying at T = 23 ± 2 ° C and RH = 50 ± 5%: without touching 2-3 hours; in depth 14-24 hours.
• Tools must be washed with water immediately after use.
PHYSICAL-CHEMICAL PROPERTIES:
• RECOMMENDED YIELD: 10-12 m2/l for each layer (applied in two layers)
• VISCOSITY: 5000-12000 cPs
• SPECIFIC WEIGHT: 1.18-1.28 gr/ml
• pH: 7-9
• VOC: 20 gr/l
HANDLING – STABILITY:
Storage: in environments with temperatures between 5 and 35°C.
The finished product, if it is stored in a dry place, at room temperature and in sealed containers, does not present stability problems. The maximum recommended storage time is 12 months. Regarding the evaluation of toxicological data, please consult the safety data sheet.
The product does not withstand freezing.
Liability note:
The advice and indications in this technical sheet are given based on our experience, but we cannot engage in responsibility.
Our technical service is available to provide any additional information required.
Reviews
There are no reviews yet.