Davinci
Davinci is a high-quality decorative paint with a pearly, iridescent finish that contains quartz.

It is a decorative finish
Eco-friendly water-based decorative finish that allows us to achieve different effects on the wall.


Two end effects
Depending on the base type chosen, we have two different final effects: a floral pattern (Xs) and a diagonal pattern.

Method of application
Apply a layer of Davinci with a brush on the wall until the desired effect is obtained.
Benefits of Decorative Paint Ferrara Design
A beautifully unique appearance for the room, with a modern touch.
Eco-friendly decorative paint that washes easily and has excellent resistance to dirt.
It is applied with a brush in a single, very easy layer.
Ready-to-use product (if necessary, it can be diluted with small amounts of water).
PREPARATION OF THE SUPPORT:
New plasters:
Make sure the plaster is dry and hardened properly (at least four weeks).
If necessary, reinforce with appropriate products.
In the presence of mold or algae, treat the surface with appropriate biocides.
Apply a possible layer of water-based fixing insulation.
Old plasters:
Clean the surfaces by removing any loose parts.
Dirt and molds must be removed with special cleaning and sanitizing products for the wall. Old paints can be removed.
Apply a layer of water-based fixative sealant.
APPLICATION PROCEDURE:
On substrates treated as described above.
Apply one or two base coats.
Apply a layer of DAVINCI, with a brush, with crossed movements to distribute the product on the wall until the desired decorative effect is obtained.
Always use the brush to blend the product in one direction. If necessary, remove possible accumulations by passing the spatula
plastic over the surface. Apply the product in small portions of the wall of approximately 1 m².
CLIMATE CONDITIONS:
• Temperature +5 / +35°C;
• Relative humidity does not exceed 75%;
• Drying at T = 23 ± 2°C and RH = 50 ± 5%: touch 30-60 minutes; in depth 14-24 hours;
• Dilution: product ready for use (if necessary, dilute with small amounts of water);
• Tools: brush, plastic spatula (if applicable);
• Tools must be washed with water immediately after use.
PHYSICAL-CHEMICAL PROPERTIES:
• pH: 7.5-9.0;
• Specific weight: 1.23 ± 0.05 g/ml;
• Viscosity: 7000-13000 cps;
• Yield: 7-8 m²/l;
• VOC: 10 gr/l.
HANDLING – STABILITY:
Storage: in environments with temperatures between 5 and 35°C.
The finished product, if it is stored in a dry place, at room temperature and in sealed containers, does not present stability problems. The maximum recommended storage time is 12 months. Regarding the evaluation of toxicological data, please consult the safety data sheet.
The product does not withstand freezing.
Liability note:
The advice and indications in this technical sheet are given based on our experience, but we cannot engage in responsibility.
Our technical service is available to provide any additional information required.
Reviews
There are no reviews yet.